Alcatel 4200-4400e

...

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

SMDR Output

The Alcatel 4400e needs to be configured to output SMDR information. 4200-4400e phone system sends the SMDR information via a serial connection. The most recents units will already have a .v24 port, but for older units you might need to purchase a .v24 module.

You will need to directly connect a serial cable from the Alcatel 4200-4400e .v24 module to the PC that NetPBX is installed and running on.

See table below for a summary of data output from Alcatel 4200-4400e:-

Download the interface files

1. Visit Tri-Line's Gateway and download the interface files, as shown below:
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817041/alcatel_4400e_2.png

2. Extract the

   Keywordmacro
   Label Alcatel 4400E.ZIP

   file onto the desktop. This should contain the following files: 

   Keywordmacro
   Label Alcatel 4400E.TDT

   .
3. Copy/paste the file into the following location

   Referencemacro
   Label C:\Program Files\Tri-Line\TIM Plus\config

   .

<a id="Install NetPBX"></a>

Installing NetPBX

The Alcatel 4400e phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

...

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

...