...
| HTML |
|---|
<a id="Configure UCME to send SysLog events"></a> |
...
Configuring UCME to send SysLog events
Login to your Cisco UCME / UC500 via telnet, as shown below:
...
| Step | IOS commands | Description |
|---|---|---|
| 1 | enable | Enter EXEC mode, enter password if requested. |
| 2 | conf t | Enter global configuration mode. |
| 3 | aaa new-model | Enable aaa accounting mode. |
| aaa accounting connection h323 start-stop group SysLog | ||
| gw-accounting syslog | ||
| acct-template callhistory-detail | ||
| 4 | logging 192.168.1.1 | Specifies the IP address to send CDR data. Where '192.168.1.1' is the machine running TIM Plus. |
| 5 | end | Exit configuration mode. |
| 6 | wr | Save changes. |
| HTML |
|---|
<a id="ConfiguringConfigure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
...
| HTML |
|---|
<a id="Configure TIM Plus to capture SysLog packets"></a> |
...
Configuring TIM Plus to capture SysLog packets
Below you will find steps on how to configure TIM Plus to receive data from your Cisco UCM:
...