Panasonic KX-TDA/E - Serial connection

These instructions help you configure your Panasonic KX-TA/E phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX

<a id="Configure the SMDR output"></a>

Configuring the SMDR output

Below you will find instructions on how to configure your Panasonic KX-TDA/E to output SMDR to TIM Plus. You will need to do this from the Panasonic Maintenance Console program:

1. Login to the Panasonic Maintenance Console program.
2. On the left-hand side click on 11.Maintenance.
3. Now on the right-hand side you will see the SMDR options which you can configure by clicking on the SMDR tab, as shown below:
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817094/panasonic_kx_tda_1.png

4. Now click on SMDR Options tab and configure the options as below:
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817094/panasonic_kx_tda_2.png

5. Now click on the Apply button and then the OK button.

<a id="Install NetPBX"></a>

Installing NetPBX

The Panasonic KX-TDA/E phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817096/panasonic_kx_ta_1.png

3. Within the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
4. In the Connection method field select No connection required from the drop-down list.
5. Click on the Save button to apply the settings