Samsung iDCS - Serial connection

These instructions help you configure your Samsung iDCS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR

Below you will find instructions on how to configure your Samsung iDCS to output SMDR to TIM Plus. You will need to use the Samsung Installation Tool:

1. Open and login to the Samsung Installation Tool.
2. On the left-hand side click and expand 5. Features.
3. Click on 5.6 System I/O Options.
4. Click on 5.6.2. LAN Printer. On the right-hand side you will have LAN Printer options. The first column will be SMDR. Below are the options and how they need to be configured:
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817091/samsung_officeserv_1.png

5. Click on the Save icon at the top to save the settings.
6. On the left-hand side click on 5.6.3. SMDR Options. On the right-hand side you will see the SMDR Options. Below are the options and how they need to be configured:
   

   Screenshotmacro
   URL http://docs.tri-line.com:8090/download/attachments/4817091/samsung_officeserv_2.png

7. Click on the Save icon at the top to save the settings.

<a id="Install NetPBX"></a>

Installing NetPBX

The Samsung iDCS phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817089/samsung_dcs_1.png

3. Within the Site Properties window, select Samsung DCS from the PBX model drop-down list.
4. In the Connection method field select No connection required from the drop-down list.
5. Finally, click on the Save button to apply the settings.