...
| Pbxsummary | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Configuring your CIL output
The Siemens Realitis/Hipath DX sends CIL information via a serial connection. You will need to directly connect a serial cable from the Siemens Hipath DX v.24 wall box to the PC that NetPBX is installed and running on.
You will need to speak to your system maintainer to enable CIL output. They will need to set CIL output to
| Keywordmacro | ||
|---|---|---|
|
Installing NetPBX
To collect the data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:
- Click on the tab.
- Select the site configured during the setup wizard and click.
Screenshotmacro