...
Confiure the SMDR output
By default the The SMDR output on the SpliceCom Maximiser is enabled .Please by default, however, you will need to check with your system maintainer whether a
password has been set up in the
phone system PBX and if so, you will need to enter this in TIM Plus
in order to be able to set up a connection with the SpliceCom Maximiserto enable the connection.
| HTML |
|---|
<p>These instructions should assist in configuring your SpliceCom Maximiser to
work with TIM Plus. If you are not familiar with PBX
configuration, please contact your system maintainer.</p>
<table class="confluenceTable">
<tbody>
<tr>
<th class="confluenceTh" width=158>Connection information</th>
<th class="confluenceTh">Description</th>
</tr>
<tr>
<td class="confluenceTd"><b>Connection type</b></td>
<td class="confluenceTd">IP
</td>
</tr>
<tr>
<td class="confluenceTd"><b>IP method</b></td>
<td class="confluenceTd"><b>TCP/IP connection: </b>
The SpliceCom Maximiser sends SMDR information via TCP/IP on port 4001. TIM Plus will connect to the IP address of SpliceCom Maximiser.
</td>
</tr>
</tbody>
</table>
<p>By default the SMDR output on the SpliceCom Maximiser is enabled. Please check with your system maintainer if they have added a 'Call Logging' password. If they have, they will need to tell
you what it is as TIM Plus will require it when it connects.</p>
<h2>Configuring TIM Plus</h2>
<p>Below you will find steps on how to configure TIM Plus to connect to your SpliceCom Maximiser to receive SMDR:</p>
<ol>
<li>Browse to TIM Plus as normal and login with your credentials.</li>
<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li>
<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/splicecom_maximiser_1.png" alt="SpliceCom Maximiser" />
<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">SpliceCom Maximiser</span> from the <span class="reference">PBX model</span> drop-down list.</li>
<li>In the <span class="reference">Connection method</span> field select <span class="keyword">Actively connect to PBX</span> from the drop-down list.</li>
<li>In the <span class="reference">Host</span> field enter the IP Address of your SpliceCom Maximiser.</li>
<li>In the <span class="reference">Port</span> field enter in <span class="keyword">4001</span>.</li>
<li>Leave the <span class="reference">Username</span> and <span class="reference">Password</span> fields blank.</li>
<li>In the <span class="reference">Connection script</span> field select <span class="keyword">SpliceCom Maximiser</span> from the drop-down list.</li>
<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol> |