Cisco UCME / UC500 - RADIUS

...

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Click on Select the site configured during the setup wizard and click Properties or create a new site and click Properties.
4. Within the Site Properties window, select the Sync tab.
5. Click on the Synchronise with the following device tick box.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_3.png

6. In the Host field, enter in the IP Address address of your UCME / UC500.
7. In the Username field, enter in the username used to login log in to your UCME / UC500.
8. Click on the Set button and enter the password used to login log in to the UCME / UC500, followed by clicking OK.
9. Finally, click Click on the Save button to apply the changes.
   
   

<a id="Configure TIM Plus to capture RADIUS packets"></a>

...

1. Browse to TIM Plus as normal and login log in with your credentials.
2. Click on the Directory tab.
3. Select the site configured during the setup wizard and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/12158183/cisco_ucme_1.png

4. Within the Site Properties window, select Cisco UCME - RADIUS from the PBX model drop-down list.
5. In the Connection method field, select RADIUS connection from the drop-down list.

6. In the Client IP field, enter the IP Address address of the Cisco UCME / UC500.

7. In the Secret field, enter the RADIUS-server key configured in the UCME (e.g. C1sco).

8. Finally, click Click on the Save button to apply the settings.