Alcatel OmniPCX Office - Serial connection

...

Configuring your SMDR output

Below you will find instructions on how Follow the instructions below to configure the SMDR output for of your Alcatel OmniPCX Office phone system.:

Alcatel-Lucent OmniPCX Office Communication Server supports two types of call metering:

• V24 metering supports V24 printing for all call metering tickets.
• IP metering supports IP printing for call metering tickets originating from a 3rd party application (Business or Hotel) via an IP connection.

The type of metering must be specified when the Office Link driver is installed. The driver can be installed in set to one of two modes: hotel or metering

To set printing options for call metering tickets, please follow the steps below:

1. Open the Counting function

   Referencemacro
   Label Counting

    function window in the OMC console and select the Accounting Printouttab.
2. Select the metering type from the drop-down boxlist:  Ext. Accounting Activation IP or Ext. Accounting Activation V24, and ensure that the associated checkbox is checked.
3. When finished, click OKClick OK to save the settings.

The table below presents a summary of data output from Alcatel:

...

If your Alcatel OmniPCX Office has been configured to send SMDR data via a serial connection, you will first need to install the NetPBX software to collect the data from the serial port and send it to TIM Plus. For setup instructions, click on the link below:

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Click on Select the site you configured during the setup wizard and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817043/alcatel_omnipcx_office_3.png

3. Within the Site Properties window, select Alcatel OmniPCX Office from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.

...