...
Configuring your CIL output
CIL access over Ethernet
| Info |
|---|
In addition to CIL access over V.24 ports, |
...
all Realitis DX and iSDX systems with |
...
firmware revision 6.0 |
...
and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three |
...
such connections; subsequent connection requests are rejected. |
| Info |
|---|
Ethernet port address information is contained in this publication. If the information on how to set-To set up and activate this feature is required, a request must be made via to Product Management at Siemens, Beeston. |
Connecting to the CIL server
To gain connection connect to the CIL server on the System/UPI cards, it is necessary for the remote CILE to open TIM Plus opens a TCP /IP connection to the IP address of the active side DX. The connection request must contain the logical port number of the particular service requiredphone system to the CIL port.
The DX IP address of the System/UPI card TCP/IP address is specified by the variable "IPACT" in
| Referencemacro | ||
|---|---|---|
|
The default listening port is
| Referencemacro | ||
|---|---|---|
|
Once a connection is established, the DX will begin sending packets to the connected clientTIM Plus.
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
...