...
Issue the change node-names command to add a new node. Two fields need to be specified as follows:
- Name: TIMPlus TIMEnterprise.
- IP Address: (the IP address of the machine running TIM PlusEnterprise)
Here is an example of a node-names configuration:
...
- Service type: CDR1
- Local Node: (set this to the node-name of the CLAN board)
- Local Port: 0 (this cannot be changed)
- Remote Node: TIMPlus TIMEnterprise (the same node-name as created in the node-names section above)
- Remote Port: (the TCP port that TIM Plus Enterprise will use to listen for CDR data, e.g. 9000)
...
LSPs (Local Survivable Processors)
If your Avaya Communications Manager systems are connected and the remote sites are LSPs then you need only configure the Master/Primary Avaya Communications Manager. When TIM Plus Enterprise receives the CDR information, it will include CDRs from all of the remote LSPs.Not linked
If you have multiple Avaya Communications Manager systems where LSPs aren't in use, you need to configure each Avaya Communications Manager separately. You must ensure that each Avaya Communications Manager has its own unique Remote Port (IP-services) setup.
...