...
| Pbxsummary |
|---|
| Supportfiles1 | Cisco UCME - RADIUS.TDT |
|---|
| Supportfiles2 | Cisco UCME - RADIUS.TDS |
|---|
| Connection | RADIUS connection |
|---|
| RequiredTask1 | Configure Cisco AXL sync |
|---|
| RequiredTask2 | Configure UCME to send RADIUS events |
|---|
| RequiredTask2RequiredTask3 | Configure TIM Enterprise to capture RADIUS packets |
|---|
|
| HTML |
|---|
<a id="Configure Cisco AXL sync |
...
Configuring Cisco AXL sync
Follow the steps below to configure TIM Enterprise to synchronise with the directory of your your Cisco UCME:
- Click on the Directory tab.
- Go to the Directory level where you want to sync the UCME files and add a new Directory Sync object. Enter a name for the object and click on the Add button, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_6.png |
|---|
|
- Left-click on the newly-created object and select Properties.
- In the Directory type drop-down list, select Cisco UCME.
- In the Host name field, enter the IP address of your UCME.
- In the Host port field, enter the port number of the IOS service, e.g. 23 .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_3.png |
|---|
|
- Click on Set password button and enter the password of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_4.png |
|---|
|
- Click on the Save button to apply the changes.
| HTML |
|---|
<a id="Configure UCME to send RADIUS events"></a> |
...
| Step | IOS commands | Description |
|---|
| 1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested |
| 2 | conf t | Enters the global configuration mode |
| 3 | aaa new-model | Enables aaa accounting mode |
| aaa accounting connection h323 start-stop group RADIUS |
| gw-accounting aaa |
| acct-template callhistory-detail |
| 4 | RADIUS-server host 192.168.0.1 auth-port 0 acct-port 1612 | Specifies the IP address and port of TIM Enterprise's RADIUS, to which CDR data will be sent, e.g. 192.168.0.1:1612 |
| 5 | RADIUS-server key C1sco | Specifies a RADIUS authentication secret that will be used by TIM Enterprise (configured in the next section), e.g. C1sco |
| 6 | RADIUS-server vsa send accounting
| Enables VSA events |
| 7 | end | Exits configuration mode |
| 8 | wr | Saves the changes |
| HTML |
|---|
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
...
...
- Click on the Directory tab.
- Go to the Directory level where you want to sync the UCME files and add a new Directory Sync object. Enter a name for the object and click on the Add button, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_6.png |
|---|
|
- Left-click on the newly-created object and select Properties.
- In the Directory type drop-down list, select Cisco UCME.
- In the Host name field, enter the IP address of your UCME.
- In the Host port field, enter the port number of the IOS service, e.g. 23 .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_3.png |
|---|
|
- Click on Set password button and enter the password of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_4.png |
|---|
|
- Click on the Save button to apply the changes.
| HTML |
|---|
<a id="Configure TIM Enterprise to capture RADIUS packets"></a> |
...