Siemens HiPath

<p>These instructions should assist in configuring your Siemens Hicom to 
work with TIM Enterprise. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd">Serial Output or IP.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Straight-through.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>IP method</b></td>
			<td class="confluenceTd">The Siemens Hipath sends the SMDR data to the IP address of the TIM Enterprise machine on a specific TCP port.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Serial connection</b></td>
			<td class="confluenceTd">If the Siemens Hipath is configured to send SMDR information via a serial connection, you will need to directly connect a serial cable from the Siemens Hipath PBX to the PC that NetPBX 
				is installed and running on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>TCP/IP connection</b></td>
			<td class="confluenceTd">If the Siemens Hipath is configured to send the SMDR information via TCP/IP the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. 
				The Siemens Hipath will need to be configured to send the SMDR data to the IP address and TCP port that TIM Enterprise is listening on.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>SMDR configuration</b></td>
			<td class="confluenceTd">You will need to speak to your system maintainer to enable SMDR output.
			</td>
		</tr>
	</tbody>
</table>

<h2>Configuring TIM Enterprise</h2>

<p>Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Siemens Hipath:</p>

<ol>
	<li>Browse to TIM Enterprise as normal and login with your credentials.</li>
	<li>Click on the <span class="button" id="list">Directory</span> tab.</li>
	<li>Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Siemens Hipath'.</li>
	<li>Left-click on it and select <span class="button" id="list">Properties</span>.</li>
	<li>From the <span class="button" id="list">General</span> settings tab select <span class="keyword">Siemens HiCom-HiPath</span> from the PBX model list.</li>
	<img src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/siemens_hipath_1.png" alt="Siemens Hipath" />
	<li>In the <span class="button" id="list">Connection</span> tab select <span class="keyword">Listen for connection from PBX</span> from the <span class="reference">Connection method</span> list.</li>
	<li>In the <span class="reference">Port</span> field enter in <span class="keyword">9000</span>.</li>
	<li>Finally, click on the <span class="button" id="list">Save</span> button.</li>
	<img src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/siemens_hipath_2.png" alt="Siemens Hipath" />
</ol>