Versions Compared

Old Version 11

changes.mady.by.user Editor

Saved on

compared with

New Version Current

changes.mady.by.user Editor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pbxsummary
Supportfiles1Siemens HiPath DX.TDT
Supportfiles2Siemens HiPath DX.TDS
ConnectionListening Active connection
RequiredTask1Configure the CIL output
RequiredTask2Configure TIM Plus

HTML
<a id="Configure the CIL output"></a>

Configuring your CIL output

CIL access over Ethernet
Info

In addition to CIL access over V.24 ports,

...

all Realitis DX and iSDX systems with

...

firmware revision 6.0

...

and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three

...

such connections; subsequent connection requests are rejected.

Info

Ethernet port address information is contained in this publication. If the information on how to set-To set up and activate this feature is required, a request must be made via to Product Management at Siemens, Beeston.

Connecting to the CIL server

To gain connection to the CIL server on the System/UPI cards, it is necessary for the remote CILE to open a TCP/IP TIM Plus establishes a TCP connection to the IP address of the active side DX. The connection request must contain the logical port number of the particular service required.The DX System/UPI card of your Siemens phone system.

You can choose the IP address of the System/UPI card TCP/IP address is specified by setting the variable "IPACT" in

Referencemacro
LabelIPACT
 in the permanent database, the . Your local maintenance engineer would normally should be able to program this address for you.

The default listening port is

Referencemacro
Label17257
.
Once a connection is established, the DX will begin sending packets to the connected client.

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Below you will find steps on how Follow the steps below to configure TIM Plus to listen for collect SMDR data from your Siemens Realitis/HiPath DX:

  1. Browse to TIM Plus as normal and log in with your credentials.
  2. Click on the Directory tab.
  3. Select Choose the site configured during the setup wizard you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URLhttp://docs.tri-line.com:8090/download/attachments/12583524/siemens_hipath_dx_1realitis.png
  4. Within In the Site Properties window, select select Siemens HiPath DX from the PBX model drop-down list.
  5. In the the Connection method field, select Listen for connections from PBX from  field, select Actively connect to PBX from the drop-down list.Leave the Host field blank
  6. In the Host field, enter the IP address of the System/UPI card of your phone system.
  7. In the the Port field field, enter in enter 17257.
  8. Leave the Username and Password fields blank.
  9. In the Connection script field, select Siemens Realitis DX from the drop-down list.
  10. Click on the the Save button  button to apply the settings.