...
| Asterisk is, in fact, a communications toolkit. Not a ready-to-go PBX. It has a lot of functionality that someone needs to craft into something. That something most often happens to be a PBX, but it doesn’t have to be a PBX. It can be contact center software, an automated call distributor, a voicemail system, a video mail system, an IP-PBX, or so much more. Someone could even add their own IoT hooks to it to turn it into some other kind of communication system. (For full details, see https://www.sangoma.com/products/open-source/). |
|---|
These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | Asterisk.TDT |
|---|
| Supportfiles2 | Asterisk.TDS |
|---|
| Requiredtask1 | Configure the SMDR output |
|---|
| Requiredtask2 | Configure TIM Plus |
|---|
| Connection | Active connection |
|---|
| RequiredTask1 | Configure the SMDR output |
|---|
| RequiredTask2 | Configure TIM Plus |
|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
Follow the steps below to enable the SMDR output on your Asterisk phone system:
- Enter the
| Referencemacro |
|---|
| Label | Server Setup System. |
|---|
|
- Under the Advanced section, edit the manager_custom.conf file.
Add the following lines to the file:
| Code Block |
|---|
|
[CDRout]
secret =
cdrdeny = 0.0.0.0/0.0.0.0
permit = 10.0.0.0/255.0.0.0
permit = 192.168.0.0/255.255.0.0
permit = 212.57.232.128/255.255.255.128
read =
write = |
- Verify and save the changes.
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Follow the steps below to configure TIM Plus to collect the SMDR data from your Asterisk phone system:
- Log in to TIM Plus and click on the Directory tab.
- Choose the site you want to configure and click .
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/4817117/asterisk_1.png |
|---|
|
- In the Site Properties window, select Asterisk from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of your Asterisk phone system.
- In the Port field, enter 5038.
- In the Username and Password fields, enter your username and password accordingly.
- In the Connection script field, select Asterisk from the drop-down list.
- Click on the Save button to apply the settings.