These instructions help you configure your Cisco UCME / BE4000 / UC500 to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | Cisco UCME - SysLog.TDT |
|---|
| Supportfiles2 | Cisco UCME - SysLog.TDS |
|---|
| Connection | SysLog connection |
|---|
| RequiredTask1 | Configure UCME to send SysLog events | RequiredTask2 | Configure Cisco AXL sync |
|---|
| RequiredTask3RequiredTask2 | Configure TIM Enterprise to capture SysLog packets |
|---|
|
...
...
...
...
...
...
Configuring UCME to send SysLog events
Use Telnet to connect to the IP address of your UCME as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/12158183/cisco_ucme_4.png |
|---|
|
Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Enterprise:
| Step | IOS commands | Description |
|---|
| 1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested |
| 2 | conf t | Enters the global configuration mode |
| 3 | aaa new-model | Enables aaa accounting mode |
| aaa accounting connection h323 start-stop group SysLog |
| gw-accounting syslog |
| acct-template callhistory-detail |
| 4 | logging 192.168.0.1 | Specifies the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent, e.g. 192.168.0.1 |
| 5 | end | Exits configuration mode |
| 6 | wr | Saves changes |
| | RequiredTask3 | Configure TIM Enterprise to capture SysLog packets |
|---|
|
| HTML |
|---|
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
Follow the steps below to configure TIM Enterprise to perform directory synchronisation with synchronise with the directory of your Cisco UCME:
- Click on the Directory tab.
- Go to the Directory level where you want to sync the UCME files and add a new Directory Sync object. Enter a name for the object and click on the Add button, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_6.png |
|---|
|
- Left-click on the newly-created object and select Properties.
- In the Directory type drop-down list, select Cisco UCME.
- In the Host name field, enter the IP address of your UCME.
- In the Host port field, enter the port number of the IOS service, e.g. 23 .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_3.png |
|---|
|
- Click on Set password button and enter the password of the IOS login that can perform synchronisation.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271095/cisco_ucme_4.png |
|---|
|
- Click on the Save button to apply the changes.
| HTML |
|---|
<a id="Configure UCME to send SysLog events"></a> |
Configuring UCME to send SysLog events
Use Telnet to connect to the IP address of your UCME as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/12158183/cisco_ucme_4.png |
|---|
|
Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Enterprise:
| Step | IOS commands | Description |
|---|
| 1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested |
| 2 | conf t | Enters the global configuration mode |
| 3 | aaa new-model | Enables aaa accounting mode |
| aaa accounting connection h323 start-stop group SysLog |
| gw-accounting syslog |
| acct-template callhistory-detail |
| 4 | logging 192.168.0.1 | Specifies the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent, e.g. 192.168.0.1 |
| 5 | end | Exits configuration mode |
| 6 | wr | Saves changes |
| HTML |
|---|
<a id="Configure TIM Enterprise to capture SysLog packets"></a> |
Configuring TIM Enterprise to capture SysLog packets
Follow the steps below to configure TIM Enterprise to receive SysLog data from your UCME:
- Click on the Directory tab.
- Choose Locate the PBX object you want to configure and click in the Directory, right-click on it and select Properties.
- A new window will open. In the General tab, select , displaying the general properties of your PBX object. Select Cisco UCME - SysLog from the Data format list and tick the Keep a local backup of data box, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271097/cisco_ucme_7.png |
|---|
|
- In Click on the Connection tab , and select SysLog connection from the Connection method list.
- In the Client IP field, enter the IP address of your UCME.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/13271097/cisco_ucme_8.png |
|---|
|
- Click on the Save button to apply the settings.