These instructions help you configure your NEC NEAX phone system to work with TIM PlusEnterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
...
| Field name | Details | ||
|---|---|---|---|
| CM40 | Default output port and attributes: 9600 baud, 8 data bits, no parity, 2 stop bits, DTR/RTS flow control. | ||
| CM13+05 | Enable SMDR for incoming calls to required stations. | ||
| CM13+06 | Enable SMDR for outgoing calls to required stations. | ||
| CM35+14 | Enable SMDR for outgoing calls to required trunk routes. | ||
| CM35+49 | Enable SMDR for incoming calls to required trunk routes. | ||
| CM08 | If SMDR for incoming calls is enabled, specify whether the setting applies to all incoming calls or only to those that use account codes. Also, include ANI/Caller ID for incoming calls.
|
...
To capture SMDR data from your NEC NEAX using a serial connection, you first need to install the NetPBXnetpbx software to collect the data from the serial port and send it to TIM PlusEnterprise. For setup instructions, click on the link below:
| HTML |
|---|
<a id="Configure TIM Enterprise"></a> |
Configuring TIM Enterprise
Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:
- Click on the tab.
- Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
- A new window will open, displaying the general properties of your PBX object. Select NEC NEAX from the Data format list and tick the
box, as shown below:Keywordmacro Label Keep a local backup of data Screenshotmacro Border false URL /download/attachments/13271314/nec_neax_1.png - Click on the tab and select No connection required from the Connection method list.
- Click on the button to apply the settings.
Screenshotmacro Border false URL /download/attachments/13271314/nec_neax_serial.png