LCR

<p>You simply need to choose the IP address and port that the web 
service should listen on. Note that TIM Plus has its own built-in 
web-server so you do not need to add any additional software.</p>

<p>When TIM Plus sends an email, it is sometimes necessary to include a hyperlink back to the server.</p>

<p>Please choose the most appropriate hostname or IP address from the list of detected addresses below.</p>

<p>It is usually preferable to use a hostname rather than an IP address,
 especially on networks that use an automatic IP addressing scheme, such
 as DHCP.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_plus/web_server_1.png" alt="Web server" />

Overview

Least-cost routing is the process of selecting a telecoms carrier on a trunk provided by another telecoms carrier. It is usually a four-digit code dialled before a number that instructs the telephone exchange to pass the call to another carrier, rather than carry it itself.

For example, if your lines are supplied by British Telecom, but you want to use a different carrier for certain calls, you can inform the British Telecom exchange not to connect those calls directly, but to route them to the other carrier network for them to connect the call. Although you are using a BT line from your premises to the exchange, the lines of the other carrier will be used from the exchange to the destination. Each carrier has its own access code which, when prepended to the dialled number, the BT line will recognise to which carrier the call has to be passed over.

A list of such access codes - along with the tariff table you wish to use to cost calls routed by this particular code - is contained in the LCR.cfg file, located within the main installation folder 

In the configuration presented below, a dialled number such as 166001615905900 would be routed to 01615905900 (Manchester) via the MCIWorldcom network.

[All LCR Views]

1660 = MCIWorldcom
1452 = Eurobell
132 = Energis

Adding an LCR code

To add an LCR code, access the

Enter the code in the