Cisco UCM / Business Edition (Call Manager) Versions 5 - 15

Configure Cisco UCM

...

These instructions help you configure your Cisco UCM version 5 - 15 to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Create Cisco Application User for AXL sync"></a>

Create Cisco Application User for AXL sync

To enable TIM Plus to query the Cisco DBdatabase, you will need to create an

1. Connect to the web management interface of your UCM node , and select Cisco Unified CM Administration from the Navigation drop

   Referencemacro
   Label Navigation

    drop-down list and click Go.
2. Log in to the system , select and click User Management from the main menu, and click . Select Application User from the drop-down list.

3. Click Add New

   and enter in the following details

    to create a new user:

   User ID:

Enter a username (e.g

4.   TIM_AXL

)

5.  

   Password:

Enter a password (e.g C1sco)

6.   C1sco 

   Confirm Password:

Repeat the password (e.g C1sco) 

7.   C1sco

   Screenshotmacro
   Border false Shadow false URL /download/attachments/4817082/cisco_ucm_1.png

   Warning
   The credentials above are shown as an example. In the interests of security, you should choose your own values.

   
   

8. Scroll down to the Permissions Information section and click Add to User Group.
9. In the new window, enter Standard Tab and then click Find. Tick on the Standard TabSync User box,  and then click on the Add Selected tab.
   
10. Click Save to apply the settings.

...

You will need to configure your Cisco UCM to send the CDR data to TIM Plus. Note that the UCM can be configured with cluster wide or server specific settings depending on how the system maintainer has installed it. Please note that by default CDR records are turned off.

1. Log into Cisco UCM Administration, and from the left-hand side menu, click on the System button and selectService Parameters.
2. Select your UCM node from the Server drop-down list.
3. Select Cisco Call Manager from the Service drop-down list.
4. In the System section, change the CDR Enabled Flag to True. Enable this parameter on all servers within the cluster you want to log calls for.
5. Change the CDR Log Calls with Zero Duration Flag to True. (This parameter enables or disables the logging of CDRs for calls which were never connected or which lasted 1 second).
6. Click on the Save button.
7. Click on the Navigation drop-down list from the top right-hand side corner, and select Cisco Unified Serviceability.
8. You may be prompted to log in with a user account with administrative permissions. If so, login with such an account.
9. Select Tools then click CDR Management.
10. Click Add New button. You will now see the Billing Application Server Parameters window.
11. Enter the following parameters:
• Host Name/IP Address: The IP address or hostname of the machine running TIM Plus.
• User Name: as configured within phase 3. Configuring TIM Plus to receive data from UCM e.g. Cisco.
• Password: as configured within phase 3. Configuring TIM Plus to receive data from UCM e.g. C1sco.
• Protocol: Select FTP or SFTP as configured above.
• Directory Path: Enter /.
• Remove the tick from Resend on Failure.
12. Now click on the Add button to complete the Billing Server configuration. The UCM node will check that the FTP/SFTP details are correct and will write a test file to the FTP/SFTP directory.
13. If it fails, you should check the FTP or SFTP details, configured above.

...

Configuring Cisco AXL sync

Below you will find steps on how to configure the Directory Sync from Cisco UCM:

1. Browse to TIM Plus as normal and login with your credentials.

2. Screenshotmacro
   Border false Shadow false URL /download/attachments/4817082/cisco_ucm_9.png

3. Click Save to apply the settings.

<a id="Configure Cisco AXL sync"></a>

Configuring Cisco AXL sync

Follow the steps below to configure TIM Plus to synchronise with the directory of your Cisco UCM:

1. Click on the Directory tab.Click
2. on Choose the site configured during the setup wizard you want to configure and click Properties or create a new site and click Properties.
3. Within In the Site Properties window, select the Sync tab.
4. Click on Tick the Synchronise with the following device tick box. box, and enter your UCM details, as shown below:
   

   Screenshotmacro

Image Removed

1. Border false URL /download/attachments/4817082/cisco_ucm_5.png

2. In the Host field, enter in the IP address of the UCM Publisher node.
3. In the Username field, enter
in
4. the username
configured in phase 2. Creating
5. of the Cisco Application User
for AXL sync
6. you configured in the previous section, e.g. TIM_AXL. 
7. Click on the Set button and enter the password configured in phase 2. Creating of the Cisco Application User for AXL syncyou configured in the previous section, e.g. C1sco, followed by clicking then click OK.
8. Finally, click Click on the Save button to apply the settings.

TIM Plus will now connect to the PBX and sync the directory objects.

Configure the FTP connection

Below you will find steps on how to configure your TIM Plus to receive data from UCM:

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Click on the site configured during the setup wizard and click Properties or create a new site and click Properties.

Image Removed

1. Within the Site Properties window, select Cisco UCM 5+ from the PBX model drop-down list.
2. In the Connection method field select Receive FTP tranfers from PBX from the drop-down list.
3. In the Username field enter in the username of your choice e.g. Cisco.
4. In the Password field enter in the password of your choice e.g. C1sco.
5. To enable data backup, click on the Options tab.

Image Removed

1. Click on the Save a backup of any data received from this PBX tick box.
2. Finally, click on the Save button.

...

your Cisco UCM and synchronise with its directory.

<a id="Configure TIM Plus to receive data by FTP"></a>

Configuring TIM Plus to receive data by FTP

Follow the steps below to configure TIM Plus to receive data from your Cisco UCM:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL /download/attachments/4817082/cisco_ucm_3.png

3. In the Site Properties window, select Cisco UCM 5+ from the PBX model drop-down list.
4. In the Connection method field, select Receive FTP transfers from PBX from the drop-down list.
5. In the Username field, enter a user name for FTP/SFTP transfers, e.g. TIM
   
6. In the Password field, enter a password for the FTP account, e.g. Ciscoftp 
7. Click on the Save button to apply the changes.

<a id="Set up FTP/SFTP in Cisco UCM"></a>

Set up FTP/SFTP in Cisco UCM

You will need to configure your Cisco UCM to send the CDR data to TIM Plus. Note that the UCM can be configured with cluster wide or server specific settings, depending on how the system maintainer has installed it. Please note that, by default, CDR records are turned off.

1. Log in to

   Referencemacro
   Label Cisco UCM Administration

    and from the left-hand menu click on the System tab and select Service Parameters.
2. Choose your UCM node from the Server drop-down list.
3. Select Cisco Call Manager from the Service drop-down list.
4. In the System section, change the CDR Enabled Flag to True. Enable this parameter on all servers within the cluster you want to log calls for.
   

   Screenshotmacro
   Border false Shadow false URL /download/attachments/4817082/cisco_ucm_11.png

5. Change the CDR Log Calls with Zero Duration Flag to True. This parameter enables or disables the logging of CDRs for calls which did not connect.
6. Click on the Save button.
7. Click on the Navigation drop-down list from the top right-hand corner, and select

   Keywordmacro
   Label Cisco Unified Serviceability

   . You may need to log in with a user account that has administrative permissions.
   Select Tools, then click on the CDR Management tab.
   Click the Add New button. You will now see the Billing Application Server Parameters window. Enter the following parameters:
   
   Host Name / IP Address: The IP address or hostname of the machine running TIM Plus.
   User Name:  Enter the user name for FTP/SFTP transfers you set up in TIM Plus, e.g. TIM
   Password: Enter the password for the FTP account you set up in TIM Plus, e.g. Ciscoftp
   Protocol: Select FTP or SFTP as desired.
   Directory Path: Enter a forward-slash character to indicate root (/).
   Remove the tick from Resend on Failure.
   

   Screenshotmacro
   Border false Shadow false URL /download/attachments/4817082/cisco_ucm_6.png

8. Next, click on the Add button to complete the billing server configuration. The UCM node will check that the FTP/SFTP details are valid and will write a test file to the FTP/SFTP directory. If this fails, you should double-check the details you entered.