Versions Compared

Old Version 35

changes.mady.by.user Editor

Saved on

compared with

New Version Current

changes.mady.by.user Technical Support

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Asterisk is, in fact, a communications toolkit. Not a ready-to-go PBX. It has a lot of functionality that someone needs to craft into something. That something most often happens to be a PBX, but it doesn’t have to be a PBX. It can be contact center software, an automated call distributor, a voicemail system, a video mail system, an IP-PBX, or so much more. Someone could even add their own IoT hooks to it to turn it into some other kind of communication system. (For full details, see https://www.sangoma.com/products/open-source/).

These instructions help you configure your Asterisk phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with or need assistance with the configuration of your PBX.

...

Configuring your SMDR output

Follow these the steps below to enable the SMDR output on your Asterisk phone system:

  1. Enter the Server Setup System.
  2. Under the Advanced section, edit the manager_custom.conf file.

  3. Add the following lines to the file:

    Code Block
    themeEmacs
    languageruby
    [CDRout]
secret = 
cdrdeny = 0.0.0.0/0.0.0.0
permit = 10.0.0.0/255.0.0.0
permit = 192.168.0.0/255.255.0.0
permit = 212.57.232.128/255.255.255.128
read = 
write =
  4. Verify and save the changes.
HTML
<a id="Configure TIM Enterprise"></a>

Configuring TIM Enterprise

...

  1. Click on the Directory tab.
  2. Choose Locate the PBX object you want to configure and click in the Directory, right-click on it and select Properties.
  3. A new window will open
    4. . In the General tab, select
  4. , displaying the general properties of your PBX object. Select Asterisk from the Data format list and tick
    5. the
  5. the 
    Keywordmacro
    LabelKeep a local backup of data
    box, as shown below:

    Screenshotmacro
    Borderfalse
    URL/download/attachments/3407878/asterisk_
    6. 2
  6. 1.png
  7. In Click on the Connection tab , and select Establish TCP connection to PBX from the Connection method list.
  8. In the Host field, enter the IP address of your Asterisk phone system.
  9. In the Port field, enter 5038.
  10. In the Username and Password fields, enter your username and password accordingly.
  11. In the
    12. Connection
  12. IP script field, select Asterisk from the drop-down list.
  13. Click on the Save button to apply the changes.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/3407878/asterisk_2.png