Versions Compared

Old Version 4

changes.mady.by.user Editor

Saved on

compared with

New Version Current

changes.mady.by.user Editor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

These instructions help you configure your SnomOne  SnomONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Pbxsummary
Supportfiles1SnomONE.TDS
Supportfiles2SnomONE.TDT
ConnectionListening connection
RequiredTask1Configure the SMDR output
RequiredTask2Configure TIM Plus

HTML
<a id="Configure the SMDR output"></a>

Configuring the SMDR output

The Snom telephone system can be configured to send its CDR records via a TCP/IP connection. To configure the output, enter the IP address and port number of the PC running TIM Plus and the port number you want to use for the data output in the 

Referencemacro
LabelCDR URL
settings of the phone system, as shown below:

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/15040524/snomone_1.png

To customize the CDR format, you can use the fields shown in the table below.

Screenshotmacro

 

The CDR string must to configured in the

Referencemacro
LabelLong
format, using the variables presented in the table below:

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/15040524/snomone_2.png

An example of a CDR string configured in the

Referencemacro
LabelLong
format is presented below:

Code Block
$$(start_date_time);$(wait_duration);$(ring_duration);$(duration);$(direction);$(orig_trunk);$(calling);$(extension);$(called);$(dest_trunk);$(redirect_dest);$(account);$(lang);$(domain);$(call_id);$(primary_call_id);$(remote_call_id)
HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Follow the steps below to configure TIM Plus to listen for SMDR data from your telephone system:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/15040524/snomone_3.png
  3. In the Site Properties window, select SnomOne from the PBX model drop-down list.
  4. In the Connection method field, select Listen for connections from PBX from the drop-down list.
  5. Leave the Host field blank.
  6. In the Port field, enter the port number configured in the phone system.
  7. Click on the Save button to apply the settings.