These instructions help you configure your SpliceCom your Splicecom Maximiser phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | SpliceCom Maximiser.TDT |
|---|
| Supportfiles2 | SpliceCom Maximiser.TDS |
|---|
| Connection | Active connection |
|---|
| RequiredTask1 | Configure the SMDR output |
|---|
| RequiredTask2 | Configure TIM Plus |
|---|
|
...
Confiure the SMDR output
...
<a id="Configure the SMDR output"></a> |
Configuring the SMDR output
By default, the call logging output of the Splicecom Maximiser is enabled and you do not normally require a password to obtain it. To protect your call logging data, you can set a
| Referencemacro |
|---|
| Label | Call Logging Password |
|---|
|
password has been set up in the PBX and if so, you will in the screen of your Maximiser's web management interface. If you decide to set a password, you need to enter this
in when configuring TIM Plus
to enable the connection(below).
| HTML |
|---|
<p>These instructions should assist in configuring your SpliceCom Maximiser to
work with TIM Plus. If you are not familiar with PBX
configuration, please contact your system maintainer.</p>
<table class="confluenceTable">
<tbody>
<tr>
<th class="confluenceTh" width=158>Connection information</th>
<th class="confluenceTh">Description</th>
</tr>
<tr>
<td class="confluenceTd"><b>Connection type</b></td>
<td class="confluenceTd">IP
</td>
</tr>
<tr>
<td class="confluenceTd"><b>IP method</b></td>
<td class="confluenceTd"><b>TCP/IP connection: </b>
The SpliceCom Maximiser sends SMDR information via TCP/IP on port 4001. TIM Plus will connect to the IP address of SpliceCom Maximiser.
</td>
</tr>
</tbody>
</table>
<p>By default the SMDR output on the SpliceCom Maximiser is enabled. Please check with your system maintainer if they have added a 'Call Logging' password. If they have, they will need to tell
you what it is as TIM Plus will require it when it connects.</p>
<h2>Configuring TIM Plus</h2>
<p>Below you will find steps on how to configure TIM Plus to connect to your SpliceCom Maximiser to receive SMDR:</p>
<ol>
<li>Browse to TIM Plus as normal and login with your credentials.</li>
<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li>
<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/splicecom_maximiser_1.png" alt="SpliceCom Maximiser" />
<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">SpliceCom Maximiser</span> from the <span class="reference">PBX model</span> drop-down list.</li>
<li>In the <span class="reference">Connection method</span> field select <span class="keyword">Actively connect to PBX</span> from the drop-down list.</li>
<li>In the <span class="reference">Host</span> field enter the IP Address of your SpliceCom Maximiser.</li>
<li>In the <span class="reference">Port</span> field enter in <span class="keyword">4001</span>.</li>
<li>Leave the <span class="reference">Username</span> and <span class="reference">Password</span> fields blank.</li>
<li>In the <span class="reference">Connection script</span> field select <span class="keyword">SpliceCom Maximiser</span> from the drop-down list.</li>
<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol> |
| Info |
|---|
Your system maintainer may have already set a call logging password for you. |
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Follow the steps below to configure TIM Plus to collect call logging data from your Splicecom Maximiser:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
| Screenshotmacro |
|---|
| URL | /download/attachments/4817032/splicecom_maximiser_1.png |
|---|
|
- In the Site Properties window, select Splicecom Maximiser from the PBX model drop-down list.
- In the Connection method field, select Actively connect to PBX from the drop-down list.
- In the Host field, enter the IP address of your Splicecom Maximiser.
- In the Port field, enter 4001.
- Leave the Username field blank.
- If your Maximiser has a
| Referencemacro |
|---|
| Label | call logging password |
|---|
|
set, enter it in the Password field; if not, leave it blank.
- In the Connection script field, select Splicecom Maximiser from the drop-down list.
- Click on the Save button to apply the changes.