These instructions should assist in configuring your BT Pathway help you configure your BT Versatility to work with TIM Plus. If Contact your system maintainer if you are not familiar with PBX the configuration , please contact your system maintainerof your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | BT Versatility.TDT |
|---|
| Supportfiles2 | BT Versatility.TDS |
|---|
| Requiredtask1 | Configure the SMDR output |
|---|
| Requiredtask3 | Install NetPBX |
|---|
| Requiredtask2 | Configure TIM Plus |
|---|
| Connection | Serial connection |
|---|
|
...
| RequiredTask1 | Configure the SMDR output |
|---|
| RequiredTask2 | Install NetPBX |
|---|
| RequiredTask3 | Configure TIM Plus |
|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
The BT Versatility outputs its SMDR data via a serial port. The default communication parameters for this serial connection are:
- Speed – 4800, 9600, 19200, 38400 or 115200 bps;
- Data - 8 bits;
- Parity - None.
The phone system has an in-built buffer to store the last 500 call records in case the receiving equipment becomes disconnected. This buffered data can be set to output to the serial port during system programming. An signal can be enabled to allow the Versatility to detect if a compatible device is receiving its SMDR data successfully. The Versatility can also be set to output SMDR data using | Referencemacro |
|---|
| Label | restricted call logging |
|---|
|
, whereby the last four digits of any dialled number is masked out.
Follow the instructions below to configure your BT Versatility for use with TIM Plus:
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_1.png |
|---|
|
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_2.png |
|---|
|
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_3.png |
|---|
|
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
To collect the SMDR data from the serial port and send it to TIM Plus, you first need to install the netpbx software. For setup instructions, click on the link below:
Install and configure NetPBX
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and follow the steps below:
- Click on the Directory tab.
- Choose the site you want to configure and click Properties.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_4.png |
|---|
|
- In the Site Properties window, select BT Versatility from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the Save button to apply the settings.