...

Introduction

The Call Volumes report enables gives you to get a complete picture of your call volumes organised by site, group or user. This drill-able report It provides a clear, graphical and tabular representation of your outbound, answered and abandoned calls, broken down into hourly blockstime slots. Internal and external calls are itemised separately and every value can be shown as either toggled between a percentage or a number. Additionally, all of the displayed values are shown as hyperlinks, allowing you to drill down further into the results.

...

On the Reports screen, select the Call volumes volumes report from the left-hand pane and click the Select this report button.

...

If both a site and group have been selected, you can further limit the report's results to include only calls by involving a particular user, by selecting it that user from the drop-down list.

Once you have selected the scope of your report, click  click on the Next button to set additional report parameters and options. To , or to run the report immediately without doing so, click the click the Finish button.

Selecting the report filters

This option allows you to filter out certain calls from your results, by selecting the values of the parameters. You can limit the results of your report by choosing one or more of the following filters:

These filters allow you to be very specific, when deciding the call information you would like to display in the final report.If you do not want to select any filters, simply press theNextbutton to skip.

Please find a brief description of all filters below:

Account code

If you want to To produce a bill report consisting only of all chargeable calls that were made using a particular account code, enter this the account code in the field provided. 

To report on more than one account code, you can use separate each code using a comma to separate the entries.

Call type

This filter allows you to define the type of call you would like want to report on. If you would like to report on all calls, leave the default setting as , in terms of where the call originated and where it was delivered, e.g. incoming, outgoing, internal, etc.  To report on all types of call, set this to All calls.

If you want to report on one call type in particular, expand the drop-down list and select from the available options.

Carrier

If you use more than one carrier, you can choose which carrier's calls to report on. To report on all calls from all carriers, leave the default setting as All carrierslimit the results to include only calls that were made using a specific carrier.

...

...

CLI

The Caller Calling Line Identification (CLI) is a phone number that calls your organisation. This is sometimes withheld by the person making the call.You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI. For example, for the telephone number of the remote caller in an incoming call scenario.

You can report on calls that originate from a specific CLI or those whose CLI matches a particular pattern of digits. For example, to report on all incoming calls from Tri-Line, you would could enter 02072652600.

This filter accepts the comparison operators ! and * (e.g. You can use the ! symbol to explicitly exclude a CLI from the report's results, and/or the

Cost

If you want to add a filter for call costs, type in the cost you wish to defineYou can define a cost filter to include calls above or below specific values by entering your criteria, as shown below. :

This filter allows you to You can specify a range (-) or use comparison operators (cost range by using the 

Destination

If you want to filter calls to a specific, known destination, you can type the name of the destination in the field text box provided. This filter accepts the comparison operators ! and * symbols for excluding values and specifying partial matches, respectively.

For example, if you want wanted to exclude all calls to France, you could enter

Dialled number

To filter calls to a specific dialled number, type the number that was dialled it in the text box provided. The dialled number can be a number that you dial out, or a DDI number within your organisation that someone dials in to get to a particular extensionis defined as the number that is dialled (in the case of an outbound call), or the DDI number that the remote party dialled to reach a particular extension or group (in the case of an inbound call).

To filter calls to a specific area, a partial number may can be entered (e.g. 0033, for  for calls to France). 

This filter accepts the comparison operators ! and * (e.g. to exclude calls to 0207 265, enter !0207265* ).You can use the ! symbol to explicitly exclude a dialled number from the report's results, and/or the 

Duration

To filter calls above or below a particular duration, enter the number of seconds and the relevant symbol in the box provided. This filter allows you to specify a range (-) or use comparison operators (>, <, ! and *).

desired duration in seconds.

You can specify a duration range by using the 

In the above example, the filter report will look for return only calls longer than 1800 seconds (30 minutes). Alternatively, you may want to exclude calls below a certain threshold (e.g. below 3 seconds).

LCR code

If you are using To filter your results to include only calls that used a Least Cost Routing (LCR) , you may want to filter your results the by LCR code, in order to check a bill from your LCR provider. To do this, enter the LCR code enter it in the text box provided.

This filter accepts the comparison operators ! and * (e.g. to exclude a specific LCR code, add the code with the required operators !162*)

You can use the ! symbol to explicitly exclude a LCR code from the report's results, and/or the 

Response

This option allows you to filter calls based on their response time.The results will be filtered according to the , measured in seconds. Specify the desired response time threshold that you define in the text box provided field. The threshold you specify will be measured in seconds.

In the above example, the search results will display calls that have a response time above greater than 10 seconds. 

You can specify a response time range by using the 

Start time

This option allows you to filter calls based on the start time of the call , which is basically the time of day the call started. Enter your preferred Specify the start time in the field text box provided , using the following format the hh:mm:ss format.

For example, if you want your results to include only calls logged that began after 10 a.m. onlyam, you need to could enter 10:00:00 in the Start time field, as shown below:

Trunk access code

If you want to filter your results by a trunk access code, enter this in the field provided.  For example, to exclude all calls with access code 9, add !9 in the filed your telephone system uses trunk access codes to connect calls using specific channels, you can limit your report's results to include only calls made using those codes. Specify the trunk access code in the text box provided.

This filter accepts the comparison operators ! and *.

You can use the ! symbol to explicitly exclude a trunk access code from the report's results, and/or the 

Selecting the report options

This section allows enables you to further narrow down your report results, by excluding certain types of calls or sorting the . It also allows you to sort the report's results in a particular manner. The filters are fairly self-explanatory. For example, if you would like to exclude weekend calls from the report, simply tick the option to exclude weekend calls. If you would like to ignore missed calls shorter than a specific duration, simply enter the duration in the box.

Exclude weekends

If you would like to To exclude weekend calls from the search your report's results, simply select the tick-box to exclude weekend callsselect the 

Show unconnected calls

If you want to To show unconnected calls , tick this box.in your report results, select the

Hide unused

Tick this option if you would like to exclude any entity which has not been usedTo exclude unused extensions from your report's results, select the

Sort order

Expanding the drop-down list available, you can choose whether you would like Choose from the

Sort results by

You may choose the order in which results are sorted by selecting the appropriate option from the list provided:To sort your report's results by a particular column, select it from the 

Selecting the report format

This section allows you to choose the media format of your completed report. The formats available are Web, PDF, Excel, CSV and XML.

More details about each report format are available in the Setting the report format section above.

<a id="Creating the report"></a>

Creating the report

When you have chosen selected a reporting period , and are happy with your selections, you have two options:

...

and have chosen any filters and options, you can either run the report immediately by clicking on the Run now button, or schedule it for future delivery.

If you click on the Run now button, the report will run instantly in your chosen format.

If you want to schedule the report to run at a later time, follow the instruction given in the Schedule a report section.

<a id="The report's results"></a>

The report's results

When selecting WEB as the output format, this report will appear as below. To view details of any filters or selection parameters used in creating this report, simply click on About this report on the top-right corner of the page. Below is an example of this report's output in Web format:

The WEB format allows for complete flexibility when viewing any report. All headers are clickable, allowing you to re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked. The WEB format also allows the user to drill-down further into any report for more detail. Simply click on any of the hyperlinks shown (in blue) and drill-down through your organisation for more detailsAs with all reports produced by TIM Plus, each page of the report includes the following information:

• the report's title
• the date and time that the report was generated
• the name of the report, if applicable

The Web format is the most interactive of all formats: all column headers are click-sortable and most graphical and tabular elements can be drilled down into, allowing deeper analysis of your results. To view details of any filters or parameters used in creating this report, click on About this report at the top-right corner of the page.

The report is divided into three sections: Graph, Details and Summary.

Graph

The Graph shows

Details

The Details section for the call volumes report replaces the graph with the

By floating your mouse over any volume figure shown you will see the % it represents. Alternatively if you float over any % figure shown, you will see the volume represented.

All numeric figures (%) shown are drillable, so simply click on it to drill-down to itemised call details as shown here:are shown as hyperlinks, allowing you to drill down into an itemised list of the calls that they represent.

Each column of the table is described here 

Below is a description of each table header:

Header	Description
Date & Time	Shows the The date and time the calls was call started.
Source	Details of The place from where the call originated.
CLIShows	The telephone number of the caller line identity of the incoming call.remote caller for inbound calls
Route	Shows the number that was dialled, in the case of an outgoing or internal call.
Destination	For outgoing calls, shows the destination of the call; for other calls, shows the type of call, e.g. unanswered, abandoned, internal, feature call.
Response	The response field shows the length of time it took before the call was answered The information displayed in this field is determined by the type of call: for incoming calls, this shows the CLI of the caller for incoming internal calls, this shows either the caller's username or extension number for outgoing calls, this shows the dialled number
Destination	The information displayed in this field is determined by the type of call: for incoming calls, this shows the name of the user whose extension answered the call, or the extension number if not available for outgoing calls, this shows the geographical location that was dialled, or an alias if defined in your contacts list for internal calls, this shows the extension that was dialled, enclosed in square brackets [ ]
Response	The length of time it took for the call to be answered (i.e. the response time.)
Duration	Shows the The duration of the call (in hours, minutes and seconds.)
Cost	Shows the The cost of the call.
Image Removed	Shows only if there is a recording associated with the call. To play, simply click on this icon.

In addition, at the foot of the table, totals are provided where applicable.

Summary

...

Summary

The

If you would like to go back and view this report for a larger section of the organisationTo modify your report to cover a larger organisational scope, click on the appropriate link in the breadcrumb, an element of the breadcrumb as shown below:-

...