Unify (Siemens) HiCom-HiPath (3000) - Serial connection

These instructions help you configure your Siemens HiCom/HiPath phone (3000) phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

...

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

...

When configuring your Siemens HiCom/HiPath(3000)  phone system

...

to send SMDR

...

data via a serial connection

...

, you need to directly connect a serial cable from the Siemens HiCom/HiPath phone system to the PC that

...

netpbx is installed and running on.

For more information about the output and configuration of your SMDR data, please contact your phone system maintainer.

<a id="Install NetPBX"></a>

Installing NetPBX

To collect the call logging data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard you want to configure and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/481702812583458/siemens_hicom_hipath_12.png

3. Within In the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
4. In the Connection method field select
Listen for connections from PBX from
5. No connection required from the drop-down list.
6. Leave the Host field blank.
7. In the Port field enter in 9000.
8. Click on the Save button to apply the settings.

...