Unify (Siemens) Realitis/HiPath DX - Serial connection

...

<a id="Configure yourthe CIL output"></a>

Configuring your CIL output

The When configuring your Siemens Realitis/Hipath DX sends to send its CIL information via a serial connection. You will , you need to directly connect a serial cable from the Siemens Hipath DX v.24 phone system's wall box to the PC that NetPBX is installed and running on.

...

running netpbx .

Your system maintainer needs to enable CIL output . They will need to set CIL output to by setting it to the 

<a id="Install NetPBX"></a>

Installing NetPBX

To collect the call logging data from the serial port of your phone system and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817027/siemens_hipath_dx_2.png

3. Within In the Site Properties window, select Siemens HiPath DX from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to save the settings.