...
Configuring your SMDR output
The SMDR output in on the LG IPLDK is disabled by default. To To enable the output, you need to amend the following programming number codessettings in the programming sections below:
Print Serial Port Selection (PGM 175)
In the Print Serial Port Selection (PGM 175) window, set Info/On-line SMDR to Telnet 1 to allow connections on TCP port 23 COM1/COM2 to send call logging data to the serial port.
| Screenshotmacro | ||||
|---|---|---|---|---|
|
SMDR Attributes (PGM 177)
| Field | Description |
|---|---|
| Save Enable |
...
| Leave this as the default, which is unticked | |
| Print Enable | This needs to be enabled by clicking on the check box |
| SMDR Record Call Type |
...
| This needs to be set to 'All Calls', you will need to select this from the drop-down list | |
| Records In Detail |
...
| This needs to be enabled by clicking on the check box | |
| Print Incoming Call |
...
| This needs to be enabled | |
| Print Lost Call |
...
| This needs to be enabled | |
| SMDR Dial Digit Hidden |
...
| Leave this as the default which is '0' | |
| SMDR Currency Unit |
...
| Leave this as the default which is blank | |
| SMDR Cost Per Metering Pulse |
...
| Leave this as the default which is blank | |
| SMDR Fraction |
...
| Leave this as the default which is '0' | |
| SMDR Start Time |
...
| Leave this as the default which is '0' | |
| SMDR Hidden Digit |
...
| Leave this as the default which is 'Right' | |
| Long Distance Call Digit Counter |
...
| Leave this as the default which is '0' | |
| Long Distance Code (Max 2 Digits) |
...
| Leave this as the default | |
| MSN Print on SMDR |
...
| This needs to be disabled | |
| Print Caller Number |
...
| This needs to be disabled |
| Screenshotmacro | ||||
|---|---|---|---|---|
|
...
| Screenshotmacro | ||||
|---|---|---|---|---|
|
| HTML |
|---|
<a id="Install NetPBX"></a> |
...
If your LG IPLDK has been configured to send SMDR data via a serial connection, you first need to install the NetPBX netpbx software to collect the data from the serial port and send it to TIM Plus. For setup instructions, click on the link below:
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
...