Alcatel OmniPCX Office - Serial connection

...

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

...

...

...

Alcatel-Lucent OmniPCX Office Communication Server supports two types of call metering:

• V24 metering supports V24 printing for all call metering tickets.
• IP metering supports IP printing for call metering tickets originating from a 3rd party application (Business or Hotel) via an IP connection.

The type of metering must be specified when the Office Link driver is installed. The driver can be installed in one of two modes: hotel or metering. You can use the OMC Counting function to specify the type of call metering for hardcopy printouts.

To set printing options for call metering tickets, please follow the steps below:

1. Open the Counting function

   Referencemacro
   Label Counting

    function window in the OMC console and select the Accounting Printouttab.
2. Select the metering type from the drop-down boxlist:    Ext. Accounting Activation IP or Ext. Accounting Activation V24, and ensure that the associated checkbox is checked.
3. When finished, click OKClick OK to save the settings.

The table below presents a summary of the data output from an Alcatel:

...

If your Alcatel OmniPCX Office has been configured to send SMDR data via a serial connection, you will first need to install the NetPBX netpbx software to collect the data from the serial port and send it to Tim TIM Plus. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps:

1. Click on the Directory tab.
2. Click on Choose the site configured during the setup wizard you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817043/alcatel_omnipcx_office_3.png

3. Within In the Site Properties window, select Alcatel OmniPCX Office from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.