Panasonic DBS Series

...

Configuring your SMDR output

Below you will find instructions on how Follow the steps below to configure your Panasonic DBS Series to output SMDR data to TIM Plus. You will need to do this The configuration needs to be performed from the Operator phone:

1. Press the ON/OFF key.
2. Press the RECALL key.
3. Press ##. You are now in to enter the 

   Referencemacro
   Label Programming mode

   .
4. Navigate to Call logging/Remote programming parameters.
5. Go to Call logging - parity Parity check and select 1 and , then press the # key.
6. Go to Call logging - evenEven/odd Odd parity and select 1 and , then press the the # key.
7. Go to Call logging - baud Baud rate (SMDR) and select 4 and , then press the # key.
8. Go to Call logging - stop Stop bit and select 1 and , then press the # key.
9. Go to Call logging - data Data length and select 4 and , then press the # key.
10. Got Go to Call logging - printing Printing selection out/in, and select 1 which will give you for incoming and outgoing calls.
11. Go to Call logging - printing Printing selection local/long distance calls, and select 1 which will to print all outgoing calls and , then press the # key.
12. Press the ON/OFF key and your settings will be savedto save the settings.

<a id="Install NetPBX"></a>

Installing NetPBX

The NEC DXE phone The Panasonic DBS Series phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you will first need to install the NetPBX netpbx software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting call logging data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard and clickyou want to configure and click Properties.
   

   Screenshotmacro
   Border false URL http://docs.tri-line.com:8090/download/attachments/4817095/panasonic_dbs_1.png

3. Within In the Site Properties window, select Panasonic DBS Series from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.