You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
Connection Type
TIM Plus captures RADIUS packets from this PBX.
Support Files
Cisco RADIUS-UCME.TDT
Cisco RADIUS-UCME.TDS
Required Tasks
$paramRequiredTask1
These instructions should assist in configuring your AGFEO AC-AS Series to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.
| Connection information | Description |
|---|---|
| Connection type | Serial Output: AGFEO AC-AS Series PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the AGFEO AC-AS Series to the PC that NetPBX is installed and running on. |
| Cable configuration | Straight-through. |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to listen for SMDR data from your AGFEO AC-AS Series:
- Browse to TIM Plus as normal and login with your credentials.
- Click on the tab.
- Click on the site configured during the setup wizard and click or create a new site and click .
- Within the Site Properties window, select AGFEO from the PBX model drop-down list.
- In the Connection method field select No connection required from the drop-down list.
- Finally, click on the button.
Labels: