Aastra Intelligate Series - Serial connection

These instructions help you configure your Aastra Intelligate phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a serial connection with this PBX.

Support Files

  Aastra PC5.TDT
  Aastra PC5.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Configure TIM Plus

Configuring your SMDR output

For your SMDR configuration, please note that Aastra Intelligate Series has multiple output formats. For TIM Plus, the output needs to be configured to PC5 format.

Below are some screenshots examples of how the Aastra Intelligate should be configured.

Setting the SMDR format to PC5

Setting the SMDR format to TCP/IP

OIP Server and TIM Plus

The OIP server has a very basic call logging module. If you intend to install TIM Plus alongside the OAI server, you will need to uninstall the call logging module from the OIP server suit, otherwise when configuring your Aastra to output the data to the TIM Plus PC, the OIP server will overwrite it with its required settings.

Installing NetPBX

If your Aastra Intelligate has been configured to send SMDR data via a serial connection, you will first need to install NetPBX software to collect the data from the serial port and send it to Tim Plus. For setup instructions, click on the link below:

Install and configure NetPBX

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Click on the site configured during the setup wizard and clickProperties.
   
   
3. Within the Site Properties window, select Aastra PC5 from the PBX model drop-down list.
4. In the Connection method field select No connection required from the drop-down list.
5. Click on the Save button to apply the changes.