Asterisk PBX

These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a TCP connection to this PBX.

Support Files

  Asterisk.TDT
  Asterisk.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring  your SMDR output

Follow the below steps to enable the SMDR output on your Asterisk PBX:

1. Enter the Server Setup System.
2. Under the Advanced section select to edit the manager_custom.conf.

3. Add the following lines to the file:
4. Click Edit to confirm the change.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to collect the SMDR data from your Asterisk:

1. Log on to TIM Plus and click on the Directory tab.
2. Click on the site configured during the setup wizard and click Properties.
   
   
3. Within the Site Properties window, select Asterisk from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP Address of your Asterisk phone system.
6. In the Port field, enter in 5038.
7. In the Username and Password fields, enter in your username and password accordingly.
8. In the Connection script field, select Asterisk from the drop-down list.
9. Click on the Save button to apply the settings.