Siemens HiPath 4000

These instructions should assist in configuring your Siemens HiPath 4000 to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to connect to your Siemens HiPath 4000 to receive SMDR:

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.

4. Within the Site Properties window, select Siemens HiPath 4000 from the PBX model drop-down list.
5. In the Connection method field select Actively connect to PBX from the drop-down list.
6. In the Host field enter the IP Address of your Siemens HiPath 4000.
7. In the Port field enter in 9000.
8. Leave the Username and Password fields blank.
9. In the Connection script field select Generic Simple from the drop-down list.
10. Finally, click on the Save button.