Overview

To configure a site, go to the Directory screen, select the site you wish to configure and click on thePropertiesbutton at the top right corner of the panel, as shown below:

The following configuration screen will appear:

All the tabs in the above window will be explained below.

PBX

The properties displayed in the PBX section will vary in accordance with the connection method supported by your telephone system. Please refer to the Connecting to your PBX section above for detailed information about each particular PBX model.

For some telephone system you may need to download the PBX interface file from your Download area on the Gateway.

Please see below a description of all properties according to the connection method used:

All connection types

Field	Description
Name	Simply type the name by which which you would like to identity the site. If there is just one site but more than one telephone system connected, enter the name by which you would like to identify the telephone system here.
PBX model	Select the PBX model from the drop-down list provided.
Connection method	From the drop-down list, select the connection method supported by your phone system.

Listening Connection

Field	Description
Host	Leave this blank although it can be configured to restrict incoming data from a specific IP address.
IP address	Enter to port number used by the phone system to send the CDR data.

Active Connection

Field	Description
Host	Type in the IP address of the PBX system you are connecting to.
IP address	Enter a port number for the call logger to connect to the phone system.
Username	If your phone system requires authentication, enter the username here.
Password	If your phone system requires authentication, enter the password here.

FTP Transfer

Field	Description
Username	Enter the username created for the FTP transfer.
Password	Enter the password created for the FTP transfer.

DSN Connection

Field	Description
DSN name	Enter the DSN name here.
Frequency	Enter the connection frequency here; i.e. how often it polls the DSN connection.
DB Script	Enter the DB script here. If you are not sure which DB script is required for your particular PBX, you can e-mail us at support@tri-line.com and we can provide the correct file.

Radius Connection

Field	Description
Client IP	Enter the IP address of the device that sends the RADIUS events .
Secret	Enter the RADIUS authentication.

Syslog Connection

Field	Description
Client IP	Enter the IP address of the device that sends the SYSLOG events.

To configure the Site's properties, simply select it and click on the Properties button, at the top right-hand side of the Sites panel, as shown below:

The following configuration screen will appear:

In the next pages, all the tabs of the above window are explained.