Asterisk PBX

These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a TCP connection to this PBX.

Support Files

  Asterisk.TDT
  Asterisk.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring  your SMDR output

Follow these steps to enable SMDR output on your Asterisk phone system:

1. Enter the Server Setup System.
2. Under the Advanced section, edit the manager_custom.conf file.

3. Add the following lines to the file:
4. Verify and save the changes.

Configuring TIM Plus

Follow the steps below to configure TIM Plus for collection of SMDR data from your Asterisk PBX:

1. Log in to TIM Plus and click on the Directory tab.
2. Select the site you configured during the setup wizard and click Properties.
   
   
3. Within the Site Properties window, select Asterisk from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP address of your Asterisk phone system.
6. In the Port field, enter 5038.
7. In the Username and Password fields, enter your username and password accordingly.
8. In the Connection script field, select Asterisk from the drop-down list.
9. Click on the Save button to apply the settings.