Panasonic KX-TD Series

These instructions help you configure your Panasonic KX-TD Series phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a serial connection with this PBX.

Support Files

  Panasonic KX Family.TDT
  Panasonic KX Family.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Configure TIM Plus

Configuring your SMDR output

Follow the instructions below to configure your Panasonic KX-TD phone system to output SMDR data to TIM Plus. The configuration needs to be performed from a Digital Proprietary Telephone (DPT) such as the KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235.

1. Press the PROG + * + #  buttons simultaneously, then enter your system password.
2. Enter programming mode 800 and press the Next button.
3. Press the Select button to set the Outgoing option to All, then click on the Store button. Click Next.
4. Press the Select button to set the Incoming option to All, then press the Store button.
5. Press the End button to complete the configuration.

Installing NetPBX

The Panasonic KX-TD Series phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

  Install and configure NetPBX

Configuring TIM Plus

Once NetPBX is configured and collecting call logging data, log in to TIM Plus and perform the steps below:

1. Click on the Directory tab.
2. Choose the site you want to configure and clickProperties.
   
   
3. In the Site Properties window, select Panasonic KX Family from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.