Panasonic KX-TD Series

These instructions help you configure your Panasonic KX-TD Series phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise establishes a serial connection with this PBX.

Support Files

  Panasonic KX-TD Series.TDT
  Panasonic KX-TD Series.TDS

Required Tasks

  Configure the SMDR output
  Install NetPBX
  Confiure TIM Enterprise

Configuring your SMDR output

Follow the instructions below to configure your Panasonic KX-TD phone system to output SMDR data to TIM Plus. The configuration needs to be performed from a Digital Proprietary Telephone (DPT) such as the KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235.

1. Press the PROG + * + #  buttons simultaneously, then enter your system password.
2. Enter programming mode 800 and press the Next button.
3. Press the Select button to set the Outgoing option to All, then click on the Store button. Click Next.
4. Press the Select button to set the Incoming option to All, then press the Store button.
5. Press the End button to complete the configuration.

Installing NetPBX

The Panasonic KX-TD Series phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

These instructions should assist in configuring your Panasonic KX-TD Series to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Configuring your SMDR

Below you will find instructions on how to configure your Panasonic KX-TD Series to output SMDR to TIM Enterprise. You will need to do this from one of the Digital Proprietary Telephone (DPT): KX-T7431, KX-T7433, KX-T7436, KX-T7230, KX-T7235:

1. Press PROG. + * + # and enter your System Password.
2. Enter 800 and press the Next button.
3. You will now see Outgoing: Off, press the Select button until you see All. When you can see All press the Store button.
4. Press the Next button and you should see Incoming: Off. Press the Select button until you see All. When you can see All press the Store button.
5. Press the End button, the programming is now complete.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Panasonic KX-TD 1232:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Panasonic KX-TD 1232'.
4. Left-click on it and select Properties.
5. From the General settings tab select Panasonic KX-TD Series from the PBX model list.

6. In the Connection tab select No connection required from the Connection method list.
7. Finally, click on the Save button.