Siemens Realitis/HiPath DX - IP connection

These instructions help you configure your Siemens Realitis/HiPath DX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise establishes a TCP connection to this PBX.

Support Files

  Siemens HiPath DX.TDT
  Siemens HiPath DX.TDS

Required Tasks

  Configure the CIL output
  Install NetPBX
  Configure TIM Enterprise

Configuring your CIL output

CIL access over Ethernet

In addition to CIL access over V.24 ports, all Realitis DX and iSDX systems with firmware revision 6.0 and above can send their CIL information by Ethernet. The System/UPI card - ACI - only allows a maximum of three such connections; subsequent connection requests are rejected. To set up and activate this feature, a request must be made to Product Management at Siemens, Beeston.

Connecting to the CIL server

TIM Plus establishes a TCP connection to the IP address of the System/UPI card of your Siemens phone system.

You can choose the IP address of the System/UPI card by setting the variable IPACT in the permanent database. Your local maintenance engineer should be able to program this address for you.

The default listening port is 17257.

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to collect the SMDR data from your Mitel 3300:

1. Click on the Directory tab.
2. Choose the PBX object you want to configure and click Properties.
3. A new window will open. In the General tab, select Mitel 3300 from the Data format list and tick the Keep a local backup of data box, as shown below:
   
   
4. In the Connection tab, select Establish TCP connection to PBX from the Connection method list.
5. In the Host field, enter the IP address of your Mitel 3300.
6. In the Port field, enter 1752.
7. Leave the Username and Password fields blank.
8. In the IP script field, select Mitel from the drop-down list.
9. Click on the Save button to apply the settings.