SpliceCom Maximiser

These instructions help you configure your Splicecom Maximiser phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Enterprise establishes a TCP connection to this PBX.

Support Files

  SpliceCom Maximiser.TDT
  SpliceCom Maximiser.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Enterprise

Configuring the SMDR output

By default, the call logging output of the Splicecom Maximiser is enabled and you do not normally require a password to obtain it.  To protect your call logging data, you can set a Call Logging Password in the System Details screen of your Maximiser's web management interface.  If you decide to set a password, you need to enter this when configuring TIM Plus (below).

Your system maintainer may have already set a call logging password for you.

Configuring TIM Enterprise

Follow the steps below to configure TIM Enterprise to collect the SMDR data from your Splicecom Maximiser:

1. Click on the Directory tab.
2. Choose the PBX object you want to configure and click Properties.
3. A new window will open. In the General tab, select Splicecom Maximiser from the Data format list and tick the Keep a local backup of data box, as shown below:
   
   
4. In the Connection tab, select Establish TCP connection to PBX from the Connection method list.
5. In the Host field, enter the IP address of your Splicecom Maximiser.
6. In the Port field, enter 4001.
7. Leave the Username field blank.
8. If your Maximiser has a call logging password set, enter it in the Password field; if not, leave it blank.
   
9. In the IP script field, select Splicecom Maximiser from the drop-down list.
10. Click on the Save button to apply the settings.
    
    

These instructions should assist in configuring your SpliceCom Maximiser to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

By default the SMDR output on the SpliceCom Maximiser is enabled. Please check with your system maintainer if they have added a 'Call Logging' password. If they have, they will need to tell you what it is as TIM Enterprise will require it when it connects.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to connect to your SpliceCom Maximiser to receive SMDR:

1. Browse to TIM Enterprise as normal and login with your credentials.
2. Click on the Directory tab.
3. Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'SpliceCom Maximiser'.
4. Left-click on it and select Properties.
5. From the General settings tab select SpliceCom Maximiser from the PBX model list.

6. In the Connection tab select Establish TCP connection to PBX from the Connection method list.
7. In the Host field enter the IP Address of your SpliceCom Maximiser.
8. In the Port field enter in 4001.
9. Leave the Username and Password fields blank.
10. In the IP script field select Splicecom Maximiser.
11. Finally, click on the Save button.