Siemens OpenOffice - IP connection

These instructions help you configure your Siemens OpenOffice phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus establishes a TCP connection to this PBX.

Support Files

  Siemens OpenOffice.TDT
  Siemens OpenOffice.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configure the SMDR output

Follow the steps below to enable the SMDR output in your telephone system:

1. Log in to the Siemens OpenOffice web portal.
2. Click on Expert Mode and then select  Basic Settings.
3. Under the Call Charges menu options, select  Call Charges - Output Format and tick the SMDR options shown below:
   
   
4. Under CDR System options, select LAN-TCP-Client from the drop-down list, as the output format.
5. In the TCP-Client field, enter the IP address of the PC running TIM Plus and the port number that you want your SMDR data to be sent to.
6. Click on the Apply tab to save the changes.

Configure TIM Plus

Follow the steps below to configure TIM Plus to collect the SMDR data from your telephone system:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   
   
3. In the Site Properties window, select Siemens OpenOffice from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP address of your Siemens OpenOffice telephone system.
6. In the Port field, enter the port number configured in the phone system.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select Siemens OpenOffice from the drop-down list.
9. Click on the Save button to apply the settings.