Mitel Mi-Voice MX-ONE - Serial connection

These instructions help you configure your Mitel Mi-Voice MX-ONE phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Connection Type

  TIM Plus listens for connections from this PBX.

Support Files

  Aastra MX-ONE - BC13.TDT
  Aastra MX-ONE - BC13.TDS

Required Tasks

  Configure the SMDR output
  Configure TIM Plus

Configuring your SMDR output

The MX-One phone system saves the call logging information into a local database, located by default in:

To edit the default path, SSH into each MX-One and use the mc command. To configure the directory structure, use the mkdir (key 7) command.

The server IP address specified above will be the IP address of the TIM Plus machine. The port number can be set to any free TCP port, but we would recommend one in the 9000 range.

To send the data, add the following two commands for the primary MX-One:

For each additional MX-One in the cluster, the following commands need to be entered, applying lim 2, 3, 4...n, accordingly.

Configuring TIM Plus

Follow the steps below to configure TIM Plus to listen for SMDR data from your MX-One:

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   
   
3. In the Site Properties window, select Aastra MX-ONE - BC13 from the PBX model drop-down list.
4. In the Connection method field, select Listen for connections from PBX from the drop-down list.
5. Leave the Host field blank.
6. In the Port field, enter the port number you have configured in the phone system.
7. Click on the Save button to apply the settings.