Siemens Hipath

These instructions should assist in configuring your Siemens Hicom to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output or IP.
Cable configuration	Straight-through.
IP method	The Siemens Hipath sends the SMDR data to the IP address of the TIM Enterprise machine on a specific TCP port.
Serial connection	If the Siemens Hipath is configured to send SMDR information via a serial connection, you will need to directly connect a serial cable from the Siemens Hipath PBX to the PC that NetPBX is installed and running on.
TCP/IP connection	If the Siemens Hipath is configured to send the SMDR information via TCP/IP the actual installation of TIM Enterprise can be anywhere on the network that the PBX is connected to. The Siemens Hipath will need to be configured to send the SMDR data to the IP address and TCP port that TIM Enterprise is listening on.
SMDR configuration	You will need to speak to your system maintainer to enable SMDR output.

Configuring TIM Enterprise

Below you will find steps on how to configure TIM Enterprise to listen for SMDR data from your Siemens Hipath:

Browse to TIM Enterprise as normal and login with your credentials
Click on the 'Directory' tab
Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Siemens Hipath'
Select Properties
In 'General settings' select 'Siemens HiCom HiPath' from the PBX model drop-down list

In 'Connection' select 'Listen for connection from PBX' from the Connection method drop-down list
In the 'Port' field enter in '9000'

Leave the 'Username' field blank
Leave the 'Password' field blank
Leave the 'IP Script' field blank
Finally, click on the 'Save' button