Most recent calls

This screen shows the most recent calls output from your telephone system. Calls are arranged such that the most recent are towards the top of the list. The Most recent calls view can be customised to show the columns each user prefers to see.

Each call displayed is colour-coded according to the same system-wide colour scheme used across TIM Plus. These are as follows:

Green: Incoming calls
Light green: Answered transferred calls
Blue: Outgoing calls
Light blue: Outgoing non-connected calls
Gray: Internal calls
Red: Abandoned DDI calls (direct Dial in)

The calls you see in the list will depend on the placement of your login in the directory. For example, if you only have access to one site's data, you'll only see calls from that site. If you are an administrator, all calls from all sites will be shown.

NOTE: Calls shown in lighter shades of the colours above indicate that they were transferred.

Columns displayed

The columns shown in the Most Recent Calls list can be customised specifically for each web user. To do this, click on Columns to display the following header selection panel:

Here is a brief description of each columns available for display on the Most recent calls screen:

Fild name	Description
Date	The date the call was made on.
Time	The time the call began.
Source	The colour of the call will identify the type of call: green for incoming, blue for outgoing, red for lost and grey for internal. For all outgoing or internal calls the extension number or users name will be shown in the source field. For incoming calls, the source will show either the generic name e.g. London, Orange, USA etc. Where you have added specific locations to numbers, these will be shown when identified. e.g. J Bloggs, New York Office.
Route	The information shown will be determined by the type of call. For incoming calls (show in green) the CLI of the caller will be shown. For incoming internal calls, either the username or extension number will be shown (in grey). All outgoing calls are displayed in blue with the dialled number displayed in the route field.
Destination	For outgoing calls the destination that was dialled is shown. All National, International and Mobile numbers are shown. Where you have added a more specific location name e.g. Joe Bloggs mobile, this will be shown instead of the generic lacation name. Where an internal extension has been dialled the extension dialled will be shown in square brackets [ ] as the call destination. For Incoming calls the name of the user whose extension answered the call is shown. If the user has not been allocated a name, the extension number is shown.
Response	The time it took to answer the call i.e. response time.
Duration	Shows the duration of the call in hours, minutes and seconds format 00:00:00.
Cost	The cost of the call will be shown for all outgoing calls. Internal and other types of calls that aren't chargeable, are shown as '00.00'.
CLI	If you are looking to find calls that came in from a particular number, type the caller line identification number in here. As with Dialled number, you may enter partial numbers.
Dialled Number	If you are looking for calls to a specific number, type the number in here. If you enter a partial number e.g. 07828, it will find all numbers beginning with the digits 07828.
Source name	The name of the person who made the call.
Source ID	The ID of the person who made the call.
Destination name	The name of the destination called e.g. Manchester, Tri-Line, London.
Destination ID	The ID of the destination called e.g. 020 7265 2697.
Tariff	The name of the tariff/carrier used to cost the call e.g. BT.
Account code	The account code associated with the call.
LCR Digits	The LCR digits used to route the call over an alternative carrier.
Trunk access code	The trunk access code used.
Data source	The location where the call originated.
Call reference	Any call reference number associated with this call.
Flags	Flags associated with the call. These flags are graphically represented as follows: Click on this speech lozenge icon to listen to the recording associated to this call. Click on this grey blank note icon to add a note to this call. Click on this coloured note icon to review notes associated with this call. Click on this green add icon to see additional legs associated with this call.

Select the columns you want to include in the list by toggling the green tick symbol alongside each one. When you have finished, click the Save button.

Column headers can be re-ordered by clicking and holding down a column header and dragging it to the new location with your mouse as shown below:

Columns can be sorted by clicking the relevant column header, each click toggling between ascending and descending order.

Editing the layout of the Most Recent Calls list is specific to each web user, so each one can customise it to their individual preference.