These instructions help you configure your Ericsson (Now Aastra/Mitel) BP phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Configuring your SMDR output
BP firmware R12 or older
If you are using firmware older than R12, set the SMDR output to type CIL 3 which is a fixed format requiring no further configuration.
BP firmware R13+
If you are using firmware R13+, set the SMDR output to Flexible CIL and configure the options as below:
Installing NetPBX
The Aastra/Mitel BP phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:
- Click on the tab.
- Choose the site you want to configure and click .
- In the Site Properties window, choose Aastra BP from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.