These instructions help you configure your NEC NEAX phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configure the SMDR output

You will need speak with your phone maintainer to enable the SMDR output in your NEC NEAX phone system.

<a id="Configure the SMDR output"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   
3. Within the Site Properties window, select NEC NEAX from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP Address of your NEC NEAX.
6. In the Port field, enter in 2599.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select NEC NEAX 2000 IVS from the drop-down list.
9. Finally, click on the Save button to apply the settings.