<p>These instructions should assist in configuring your Samsung DCS to 
work with TIM Plus. If you are not familiar with PBX 
configuration, please contact your system maintainer.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=158>Connection information</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Connection type</b></td>
			<td class="confluenceTd"><b>Serial Output: </b>
				The Samsung DCS sends SMDR information via a serial connection, you will need to directly connect a serial cable from the Samsung DCS PBX to the PC that NetPBX is installed and running on.
				<p>The Samsung DCS Compact requires a Miscellaneous card for SMDR output.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cable configuration</b></td>
			<td class="confluenceTd">Straight-through.
			</td>
		</tr>
	</tbody>
</table>

<h2>Configuring your SMDR</h2>

<p>Below you will find instructions on how to configure your Samsung DCS to
 output SMDR to TIM Plus. You will need to do this from a LCD 
handset. Just use the down arrow key to move to each option.</p>

<ol>
	<li>Open Programming and select <span class="button no_margin">725</span>.</li>
	<li>Program each option as stated below:</li>
	<table class="confluenceTable">
		<tbody>
			<tr>
				<th class="confluenceTh" width=158>SMDR field</th>
				<th class="confluenceTh">Value</th>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Page Header</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Lines per page</b></td>
				<td class="confluenceTd"><span class="keyword">1</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Incoming Call</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Outgoing Call</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Authorise Code</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>SMDR Start Time</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>In/Out Group</b></td>
				<td class="confluenceTd"><span class="keyword">No</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>DND Calls</b></td>
				<td class="confluenceTd"><span class="keyword">No</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Wake-Up Calls</b></td>
				<td class="confluenceTd"><span class="keyword">No</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Directory Names</b></td>
				<td class="confluenceTd"><span class="keyword">None</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Caller ID Data</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>Abandoned Call</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>No of Dial Mask</b></td>
				<td class="confluenceTd"><span class="keyword">00</span></td>
			</tr>
			<tr>
				<td class="confluenceTd"><b>DID Num/Name</b></td>
				<td class="confluenceTd"><span class="keyword">Yes</span></td>
			</tr>
		</tbody>
	</table>
	<li>Now press the <span class="button no_margin">SPKR</span> key.</li>
	<li>Select <span class="button no_margin">804</span>.</li>
	<li>Dial <span class="keyword">0</span> and use the arrow keys and select SMDR.</li>
	<li>Now press the <span class="button no_margin">TRSF</span> key.</li>
</ol>

<h2>Configuring TIM Plus</h2>

<p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Samsung DCS:</p>

<ol>
	<li>Browse to TIM Plus as normal and login with your credentials.</li>
	<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
	<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span>or create a new site and click <span class="button no_margin">Properties</span>.</li>
	<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_Plus/pbx/samsung_dcs_1.png" alt="Samsung DCS" />
	<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">Samsung DCS</span> from the <span class="reference">PBX model</span> drop-down list.</li>
	<li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li>
	<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol>