These instructions help you configure your Siemens HiCom/HiPath phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The Siemens HiCom/HiPath doesn't have the SMDR output enabled by default. Please contact your phone maintainer to enable the output for incoming, outgoing and internal calls.

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log on to TIM Plus as usual and apply the following settings:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   
3. Within the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
4. In the Connection method field select Listen for connections from PBX from the drop-down list.
5. Leave the Host field blank.
6. In the Port field enter in 9000.
7. Click on the Save button to apply the settings