These instructions help you configure your Siemens HiPath 4000 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The Siemens HiPath 4000 doesn't have the SMDR output enabled by default. Please contact your phone maintainer to enable the data output for incoming, outgoing and internal calls.

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to collect the SMDR data from your Siemens HiPath 4000

1. Browse to TIM Plus as normal and login with your credentials.
2. Click on the Directory tab.
3. Select the site configured during the setup wizard and clickProperties.
   
4. Within the Site Properties window, select Siemens HiCom-HiPath from the PBX model drop-down list.
5. In the Connection method field select Actively connect to PBX from the drop-down list.
6. In the Host field, enter the IP Address of your Siemens HiPath 4000.
7. In the Port field, enter in 9000.
8. Leave the Username and Password fields blank.
9. In the Connection script field, select Generic Simple from the drop-down list.
10. Click on the Save button to apply the settings.