These instructions help you configure your BT Versatility to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

The BT Versatility outputs its SMDR data by serial V24/RS232 port.  The default communications parameters for this serial connection are: Speed – 4800, 9600, 19200, 38400 or 115200 bps; Data - 8 bits; Parity - None.

The phone system has an in-built buffer to store the last 500 call records in the case of the receiving equipment becoming disconnected. This buffer can be output to the serial port as required and is enabled during system programming. An X-ON/X-OFF signal can be enabled to allow the Versatility to detect if a compatible device is receiving its SMDR data successfully.  The Versatility can also be set to output SMDR data using "restricted call logging", whereby the last four digits of any dialled number is masked.

 Use the following documents as a guide to configuring your BT Versatility with TIM Plus:

<a id="Install NetPBX"></a>

Installing NetPBX

To collect the SMDR data from the serial port of the Versatility and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and follow the steps below:

1. Click on the Directory tab.
2. Choose the site you want to configure and click  Properties.
   
3. In the Site Properties window, select BT Versatility from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Cliick on the Save button to apply the settings.