These instructions help you configure your Samsung iDCS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

Follow the intructions below to configure your Samsung iDCS to output SMDR data to TIM Plus.

1. Open and log in to the Samsung Installation Tool software.
2. Click on the 5. Featuresoption from the left-hand menu.
3. Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
4. In the LAN Printer options configure the entries in the SMDR column, as shown below:
   
5. Click on the Save icon to save the settings.
6. Click on the 5.6.3. SMDR Options tab and configure the following settings:
   
7. Click on the Save icon at the top to save the settings.

<a id="Install NetPBX"></a>

Installing NetPBX

The Samsung iDCS phone system sends SMDR data via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:

1. Click on the Directory tab.
2. Choose the site you want to configure and clickProperties.
   
3. In the Site Properties window, select Samsung DCS from the PBX model drop-down list.
4. In the Connection method field select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.