These instructions help you configure your Samsung iDCS phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

<a id="Configure the SMDR output"></a>

Configuring your SMDR output

Follow the intructions below to configure your Samsung iDCS to output SMDR data to TIM Plus.

1. Log in to the Samsung Installation Tool software.
2. Click on the 5. Featuresoption from the left-hand menu.
3. Click on the 5.6 System I/O Options tab and select 5.6.2. LAN Printer.
4. In the LAN Printer options configure the entries of the SMDR column, as shown below:
   
5. Click on the Save icon at the top to save the settings.
6. On the left-hand side, click on the 5.6.3. SMDR Options tab. On the right-hand side, you will now see the SMDR Options. Below are the options and how they need to be configured:
   
7. Click on the Save icon at the top to save the settings.

<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to collect the SMDR data from your Samsung iDCS:

1. Click on the Directory tab.
2. Select the site configured during the setup wizard and clickProperties.
   
3. Within the Site Properties window, select Samsung DCS from the PBX model drop-down list.
4. In the Connection method field, select Actively connect to PBX from the drop-down list.
5. In the Host field, enter the IP address of your Samsung iDCS.
6. In the Port field, enter in 9000.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select Samsung from the drop-down list.
9. Click on the Save button to apply the settings.